Microphone

A microphone is required for test transmissions, and plugs into the user interface on the front panel. The microphone can be configured to transmit over the air or as line audio.

Tone Remote

The tone remote module enables a despatch console (desktop controller) to control a remote base station via either a 2-wire or 4-wire leased circuit. The tone remote takes up only 2U in a 19 inch rack and can contain one or two tone remote modules.

Tool Kit

This includes:

  • Control Panel Board Remover
  • Spanner 5/16
  • Torx-Driver T8
  • Torx-Driver T10
  • Torx-Driver T20
  • Screwdriver Pozidrive 2
  • Screwdriver Blade 5.5mm
  • Tuning Tool Ceramic 2.2mm
  • Tuning Tool 0.9 x 0.4mm
  • Tuning Tool Johanson 8877
  • Nut driver M3 5.5mm
  • Tool bag.

Wall Mount Kit

Additional brackets and screws to enable wall mounting.

Programming Kit

Contains service kit, CD and cable.

Programming Cable

Programming cable available separately.

Calibration Test Unit

To configure, run-up and test the TB7100 for operation.