TaitNet QS² Simulcast - Specifications
General | |
| Max No of transmitters per system | 31 |
| Max No of receivers per system | 40 |
| Number of RF channels per system (multiple systems supported) | 1 |
Equalisation | |
| Band Width | 300Hz-3Hz |
| Accuracy - Amplitude - Phase | ± 1 dB ± 5º |
| Equalisation - End to end loss @ 1 kHz - Delay between two sites | 16 dB 50mSec (manual) 5mSec (automatic) |
| Amplitude response | +2 to -6 dB |
CTCSS | |
| Any Single EIA Group A, B or C Tone, | |
| Synchronisation | GPS 1ppS |
| Max Level | 2 Vp-p, 5k Ohm load |
| (Selectable) Reverse Burst | 200 ms Duration, 180 ms @ 120º 200 ms Duration, 150 ms @ 180º |
Distribution System Signalling | |
| Control to Remote Site | Idle tone |
| Remote to Control Site | Idle Tone |
| Note: E & M signalling is supported in the Remote to Centarl direction only (solar installations), this option will not allow link/site monitoring in this direction. | |
Link System Levels | |
| Control Site to Remote Site | Traffic: -12 dBm Signalling: -16 dBm |
| Remote Site to Control Site | Traffic: -10 dBm Signalling: -16 dBm |
Location http://www.taitworld.com/main/index.cfm/1,242,0,44,html
© 2008 Tait Electronics Ltd
