Frequency RangesBandOperational Frequency+ Transmit Power+ 
VHFB1136-174MHz 25W 
 B1136-174MHz 50W 
 B1136-174MHz 110W 
UHFH5400-470MHz 25W 
 H5400-470MHz 40W 
 H6450-530MHz 25W 
 H7450-520MHz 40W 
700/800MHz TransmitReceive  
 K5762-776MHz762-776MHz  
  792-825MHz 30W (<806MHz) 
  850-870MHz850-870MHz35W (>806MHz) 
Frequency Stability±1.5ppm (-30ºC to 60ºC/-22ºF to 140ºF)
Channel /Talkgroups1000 channels/30 zones
Power Supply10.8-16VDC
Channel Spacing12.5/15/20/25/30kHz
Frequency Increment/Channel Steps2.5/5/6.25
Dimensions (DxWxH) Control Head35 x 184 x 71mm (1.38 x 7.24 x 2.8in)
Dimensions (DxWxH) Radio Body 
25W175 x 160 x 52mm (6.9 x 6.3 x 2.1in)
30/35/40/50W195 x 160 x 52mm (7.7 x 6.3 x 2.1in)
110W370 x 250 x 121mm (14.6 x 9.8 x 5in)
Weight Control Head330g (11.6oz)
Weight Radio Body     
25W1200g (42.3oz)
30/35/40/50W1400g (49.4oz)
110W8400g (296oz)
Operational Temperature-30ºC to 60ºC (-22ºF to 140ºF)
SealingIP54 dust and rain
RF Connector50 ohm BNC or Mini UHF
Interface Connectors3 Interface Connectors with Serial Ports

Environmental Standards

Applicable MIL-STD

Method
25/30/35/50/110W		 Procedure
25/30/35/50W		Procedure
110W		 
Low Pressure
High Temperature
Low Temperature
Temperature
Shock
Solar Radiation
Rain
Humidity
Salt Fog
Dust
Vibration
Shock		500.4
501.4
502.4
503.7
505.4
506.4
507.4
509.4
510.4
514.5
516.5		 2
1, 2
1, 2
1
1
1, 3
1
1
1
1
1, 6		2
2
2
1
-
3
-
1
1
1
6		 
* Also meets equivalent superseded MIL-STD 810 C, D & E.

Transmitter

 VHF/UHF (TIA/EIA 102 and 603a)700/800MHz (TIA/EIA 102 and 603a) 
Output Power     
25W
25W, 12W, 5W, 1W    
30W
  30W, 15W, 5W, 2W  
35W  35W, 15W, 5W, 2W  
40W40W, 20W, 15W, 10W    
50W50W, 25W, 15W, 10W    
110W110W    
Modulation Limiting     
25/30kHz channel±5kHz ±5kHz  
12.5kHz channel±2.5kHz ±2.5kHz  
FM Hum & Noise     
25/30kHz channel-43dB -40dB  
12.5kHz channel-38dB -33dB  
Audio Response (Analogue)300-3000Hz +1/-3dB
Audio Distortion< 3% at 1kHz 60% deviation
Transmit Attack Time (TIA/EIA 102)50ms

Receiver

Analogue SensitivityVHF/UHFVHF 50WVHF 110W700/800MHz 
12dB SINAD-118dBm (0.28μV)-117dBm (0.315μV)-119dBm (0.25μV)-118dBm (0.28μV) 
Digital Sensitivity (TIA/EIA-102)     
5%BER-121dBm (0.20μV)-120dBm (0.233μV)-122dBm(0.18μV)-122dBm (0.18μV) 
Intermodulation Rejection (TIA/EIA 102)-75dB-75dB-70dB-75dB 
Adjacent Channel Selectivity     
25/30kHz channel (TIA/EIA 603a)-75dB-80dB-75dB-75dB 
12.5kHz channel (TIA/EIA 102)-65dB-70dB-70dB-65dB 
Spurious Response Rejection-75dB-90dB-70dB-75dB 
FM Hum & Noise     
25/30kHz channel-43dB-43dB-43dB-43dB 
12.5kHz channel-40dB-40dB-40dB-40dB 
Residual Audio Noise Ratio45dB45dB45dB45dB 
Audio Distortion @ Rated Audio3% @ 1kHz 60% modulation (typical)
      

Regulatory Data

 
USAVHFCFR 47 Parts 22, 90.210, 74, 90, 95 
 UHFCFR 47 Parts 22, 90.210, 74, 95A, 90 
 800MHzCFR47 Parts 22, 90 
Canada RSS-119 
Europe EN300 086, EN300 113 
  EN301 489 
  EN60950 
Australia/New Zealand AS/NZ54295 
Type Approval FCCIndustrie Canada  
25WVHFCASTMAB1E737A-TMAB1E  
 UHFCASTMAH5E737A-TMAH5E  
  CASTMAH6E737A-TMAH6E  
30/35WUHFCASTMAK5F737A-TMAK5F  
50WVHFCASTMAB1Fn/a  
40WUHFCASTMAH5Fn/a  
  CASTMAH7Fn/a  
110W (ERFPA)VHFCASTMAB1Zn/a  
Emission Designators10K0F1D, 10K0F1E, 10K0F7D,
10K0F7E, 11K0F3E, 12K7F1D
16K0F3E, 6K60F2D, 7K70F1D
8K10F1D, 8K10F1E, 8K10F7D
8K10F7E, 9K60F2D		  

Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only.

+Please note that not all frequency bands and power outputs are available in all markets. For further information please check with your nearest Tait office or authorised dealer.

The word Tait and the Tait logo are trademarks of Tait Electronics Ltd. Tait is an ISO9001: 2000 and ISO 14001: 2004 certifi ed supplier.