Unless indicated, specifications are typical performance measurements per TIA/EIA-603-A standards.


General

Operational FrequencyVHFUHF700/800MHz
 136-174MHz380-520MHz762-870MHz
Electronic Switching Range≥2% of the centre frequency (e.g. 10MHz @ 500MHz)
Channel/Network Capacity255
Channel Spacing12.5kHz, 20kHz, 25kHz
Channel Increment0.125kHz
Dimensions
Height
Width
Depth
Subrack only
Including front panel		177.8mm (7in)
482.6mm (19in)

386mm (15.2in)
409mm (16.1in)
Weight (with AC and DC PMU) 
5/50W Base Station System
100W Base Station System		20.6kg (45.4lb)
21.5kg (47.4lb)
Operational Temperature-30ºC to 60ºC (-22ºF to 140ºF)
DescriptionModular Base Station/Repeater/Receiver
Frequency Stability±0.5ppm (-30ºC to 60ºC/-22ºF to 140ºF)
External Reference10MHz or 12.8MHz
Power Consumption12V PA12V PMU24V PMU48V PMU120VAC
Standby
Tx @ 5w
Tx @ 50w
Tx @ 100 W		0.81A
2.2A
9.2A
-		1.2A
2.7A
10.0A
19.2A		0.63A
1.4A
5.0A
10.3A		0.3A
0.65A
2.6A
4.9A		-
0.45A
1.3A
2.2A
Supply Requirements
Mains
DC		88 to 264V (PFC Power Factor Correction)
12V, 24V, 48V (Nominal +ve or -ve earth)
Adjacent Channel Power
Analogue 20/25kHz
Analogue 12.5kHz
Digital 12.5kHz		<-70dB (EIA)
<-60dB (EIA)
<-60dB (IS-102)
Environmental StandardsApplicable MIL-STD 810 C, D, E & F tests



Audio

Audio InterfacesInput
600Ω Balanced
Microphone		Output
600Ω Balanced
Monitor Speaker
Audio Interface Level-20dBm to 0dBm nominal
(300 to 3400Hz)
-20dBm to -14dBm nominal
(67 to 300Hz)		-20dBm to 6dBm nominal
(300 to 3400Hz)
-20dBm to -14dBm nominal
(67 to 300Hz)
Frequency Response+0.5/-2.0dB rel. 1kHz (300 to 3000Hz)
Audio Distortion<3% typical



Transmitter

Modulation Limiting
12.5kHz channel
20kHz channel
25kHz channel		±2.5kHz
±4kHz
±5kHz
Modulation Fidelity<3% (TIA-102A)
Transmit Rise Time≤2.5ms
Transmitter Power RatingSingle 1/5W Base Station System
Single 5/50W Base Station System
Single 10/100W Base Station System
FM Hum & Noise
12.5kHz & 20kHz channel
25kHz channel		-50dB (300Hz-3kHz [ANSI/TIA])
-55dB (300Hz-3kHz [ANSI/TIA])
Conducted/Radiated EmissionsVHF/UHF
<-36dBm 9KHz to 1GHz
<-30dBm 1GHz to 4GHz		700/800MHz
<-20dBm to 9GHz
Emission Designators11K0F3E, 16K0F3E, 6K60F2D, 9K60F2D
8K10F1E, 10K10F1E, 8K10F7E, 10K0F7E,
8K10F1D, 10K10F1D, 8K10F7D, 10K0F7D

Receiver
Analogue Sensitivity (12dB SINAD)-119.5dBm (<0.25μV)
Digital Sensitivity (TIA/EIA-102)-120.5dBm (0.21μV) @ 5% BER
Spurious EmissionsRadiated
<-57dBm EIRP to 1GHz
<-47dBm EIRP above 1GHz		Conducted
<-90dBm to 1GHz
<-70dBm above 1GHz
Spurious Response>100dB [ANSI/TIA]
Intermodulation80dB [ETSI]
85dB [ANSI/TIA]
Selectivity (EIA 603)VHF/UHF
85dB NB, 90dB WB		700/800MHz
79dB NB, 84dB WB
Digital Adjacent Channel Rejection

60dB TIA 102A + ETSI 300 -113 (across all bands)

Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. For further information please check with your nearest Tait office or authorised dealer.

More Information

Go to the Support website

for user documentation.

Read about Regulatory Compliance

Tait ensures its products meet regulatory compliance in all of its markets.

Contact Us